Your Cart is Empty


Schiit - Ragnarok

EMI Starting from ₹ 16,077.

Buy Headphones on EMI

Go for an easy EMI scheme which allows you to pay for your orders over a convenient period. A minimum purchase value of Rs. 500 is required to avail the EMI facility and the facility can be availed for tenures of 3, 6, 9 or 12 months.

This payment method is currently only available for customers using credit cards issued by Kotak, Axis, ICICI, IndusInd, HDFC, HSBC, SBI, AMEX, RBL & STANC Banks.

After checking out, Select the "Credit Card / Debit Card / Net Banking / EMI" option, which will then direct you to the PayU Payment gateway. Select your card and check the installment value and the overall interest charged on the transaction. 

The interest rate charged varies from bank to bank. Here is a summary of the interest rates:

Bank Min Amount (INR) 3 Months 6 Months 9 Months 12 Months 18 Months 24 Months
KOTAK 500 12% 12% 14% 14% 15% 15%
AXIS 2500 12% 12% 13% 13% 15% 15%
ICICI 1500 13% 13% 13% 13% 15% 15%
INDUSIND 2000 13% 13% 13% 13% 15% 15%
HDFC 3000 13% 13% 14% 14% 15% 15%
HSBC 2000 12.50% 12.50% 13.50% 13.50% 13.50% -
SBI  2500
- -
- -

These are annualized interest rates charged on a monthly reducing balance, which means that the principal amount is reduced with every EMI and the interest is calculated on the outstanding balance.

No processing or convenience fees are charged on any EMI transactions.


  1. Minimum Order value for EMI eligibility varies from Bank to bank. 
  2. EMI purchases need to be made on a single credit card and cannot be split across multiple cards.
  3. EMI monthly schedules begin from the next card billing statement post the transaction date as determined by your bank.


Shipping Icon Shipping & Delivery

Tick Icon Free Express Shipping

Tick Icon Delivery Expected within 8 to 12 weeks

7 Days Replacement

Yay! This item is eligible for replacement.

This product is eligible for a replacement if the return request is raised within 7 days of delivery, and ONLY in the unfortunate event that it is found to be defective. This policy is not applicable to customers who are not happy with the product.

Once the manufacturing defect has been confirmed by our inspection team, we will provide a replacement of the originally ordered product. In case of replacements not being available, you can choose another variant, full store credit or a full refund will be provided.

Read more

Confused? Don't be, when there's a Guru to guide the way.

Recommended Accessories

  • The Short Story

    Ideal for

    Ideal for
    Indoor Use


    5 Years of

    Designed & Made
    in the USA

  • The Long Story

    Complete Integrated Amplifer

    Ragnarok includes 5 relay-switched inputs—two balanced and three single-ended, as well as balanced and single-ended preamp outputs for use as a preamp. For outputs, both balanced and single-ended outputs are provided for headphones, and balanced speaker terminal outputs for loudspeakers. 

    Drives IEMs & Loudspeakers

    Plug in your sensitive headphones and set Ragnarok’s gain to 1. You’ll enjoy a silent background, and the fine control that a 64-step attenuator can provide. Or run it with the most power-hungry orthodynamic headphones you're aware of. With gain set at 20, and 15W RMS into 32 ohms, you’re ready for an amazing performance. Also, with 60W per channel into 8 ohms, Ragnarok delivers amazing performance with most popular speakers.

    Only Signal in the Signal Path

    Ragnarok is an "intelligent" amplifier, using a microprocessor to oversee every aspect of its operation—from quiescent bias, to DC offset, to complete fault protection. It’s also designed so that any major problem mutes all the outputs and reverts the amp to its low-gain, zero volume mode. This means we can dispense with coupling caps and DC servos entirely, for a gain stage that has nothing in the signal path—except for your music.

    What Are Intelligent Microprocessors? 

    Lots of amps use microprocessors to oversee their fault protection.
    But Ragnarok goes much farther than that. It uses a 16-bit PIC micro controller and 12-bit DACs to monitor and regulate all operational points of the amplifier, including quiescent current, DC offset, and overcurrent protection. It samples key operational points about 30 times a second, and provides continuously updated control inputs to the gain stage about 3 times per second (or faster, in the case of a fault.) The benefits of this are as follows:
    1. Ragnarok's operating points won't change over time. Once it's on, and the control system has settled to its thermal operating point, Ragnarok's performance is consistent and predictable.
    2. Schiit can throw out the DC servo entirely. DC servos are a technique that many amps use to eliminate DC offset on the output without coupling capacitors.Ragnarok’s signal path is DC-coupled from input to output, with no DC servo—and no worries that the DC operating point will drift over time.
    3. If there is ever any fault (shorted speaker cables,  AC power loss, etc), Ragnarok is engineered to provide a hard shutdown to protect speakers and headphones—disconnecting all outputs, reducing the input volume to minimum, and defaulting to the lowest gain mode.

    Made in USA

    The vast majority of the total production cost of the Ragnarok—chassis, boards, assembly, etc—goes to American companies manufacturing in the US. Making Schiit's Ragnarok truly 'Made in USA'.
  • Specifications

    FREQUENCY RESPONSE 20Hz-20Khz, -0.25db
    2Hz-110KHz, -3dB
    MAXIMUM POWER 100W RMS per channel (4 ohms)
    60W RMS per channel (8 ohms)
    15W RMS per channel ( 32 ohms)
    10W RMS per channel (50 ohms)
    1.7W RMS per channel (300 ohms)
    850mW RMS per channel (600 ohms)
    THD Less than 0.006%, 20Hz-20KHz, at 1V RMS
    IMD Less than 0.008%, CCIF at 1V RMS, high gain mode (worst case)
    SNR More than 103db, unweighted, referenced to 1V RMS, in gain = 1 mode
    CROSSTALK Less than -80dB, 20Hz-20KHz
    OUTPUT IMPEDANCE 0.03 ohms
    GAIN 20 (26dB), 5 (14dB), 1 (0db) via front panel switch.
    TOPOLOGY Fully discrete Crossfet™ circlotron-style output stage with solid state voltage gain stage, microprocessor management of quiescent current and DC offset, as well as discrete summing stages for single-ended output
    PROTECTION microprocessor monitoring of fault conditions including DC, overcurrent, and transient phenomena, with relay muting on any fault
    POWER CONSUMPTION 75W quiescent, 500W max
    WEIGHT 14.5 (32 lbs)
    Schiit Ragnarok
  • Warranty

    Don’t sweat it, This Schiit product is covered by a 5 Years manufacturer's warranty.
    Learn more

Customer Reviews

No reviews yet