FRESHLY UPGRADED FREYA+ IS HERE WITH EVEN BETTER PERFORMANCE & FEATURES

The all-new and upgraded version of the original Freya is here. The refined Freya+ delivers superior performance with additional features and enhanced ease of use. At its core, the Freya+ still remains a purely practical, balanced remote-control preamp allowing you to shift seamlessly between passive, differential buffer, and differential tube gain modes. Enjoy the freedom of controlling your Freya+ from the comfort of your chair, thanks to the 128-step relay-switched stepped attenuator volume control paired with perfect channel matching.

GET RID OF ALL KINDS OF HISS AND HUM WITH WHISPER-SILENT TUBE STAGE

No hiss or hum can hinder the performance of the Freya+ thanks to the renewed tube stage coupled with new-production 6SN7 tubes, DC heaters, semi-circlotron and the whisper-silent noise-cancelling output stage. Moreover, the tube heater and high voltage rails turn off on their own when they are not in use saving the lives of those precious tubes.

PAIRED WITH A DIFFERENTIAL BUFFER STAGE FOR EASY INTERFACE

The buffers of Freya+ aren't just any buffers, they are differential with the ability to convert single-ended signals to balanced for easy interaction with the overall system. Additionally, you can even use it to change single-ended sources to drive mono Vidars and Aegirs.

EASY-TO-USE 128-STEP RELAY-SWITCHED VOLUME ATTENUATOR & A HANDY REMOTE CONTROL

The relay-switched stepped attenuator for volume brings about the most crucial change of perfect channel matching and almost no distortion. While other preamps with relay-stepped attenuators tend to make things complex with buttons and screens, the Freya+ makes it super convenient with a practical volume knob. There are times when you need a remote control to manage the volume. Therefore the Schiit Freya+ comes with a custom remote control that allows you to manage volume, input switching, output switching, and muting. The motorized potentiometer adapts itself to match the remote setting when the remote control is in use.

CONNECT FREYA+ WITH ANY SCHIIT DACS FOR A PURE REMOTE CONTROL SYSTEM

If you are looking for a full-proof remote-controlled system to integrate your digital gear with the rest of your system, then you should pair the Freya+ with Gungnir Multibit or Yggdrasil or any other Schiit DACs.

CRAFTED AND DESIGNED ALMOST ENTIRELY IN CALIFORNIA, USA

Designed and made almost entirely in California, the chassis, boards, transformers, assembly of the Schiit Freya+ were manufactured by US companies. The chassis of the Freya+ is made in minutes from Schiit's facility while the PCBs are developed just over the hill from Schiit's facility or in NorCal.

The Schiit Story

The story of Schiit Audio begins with two veteran audiophiles Jason Stoddard, formerly of Sumo, and Mike Moffat, formerly of Theta coming together to shake things up a bit. Both of them have extensive experience in developing lots of audio and A/V products including the Andromeda III, Cobalt 307, DS Pre and Angstrom 200. From power amplifiers, I/V conversion stages, D/A converters, relay-switched stepped attenuator volume controls in preamps to developing the first DTS home theatre surround processor on the market, Schiit Audio has developed a lot of audio products over the years.

Getting into Designing Headphones

Headphones are the need of the hour everyone who likes music uses a headphone. Therefore Schiit Audio moved to develop personal audio equipment while continuing to design a speaker-based system which includes the industry-leading preamps, amps and DACs. So right now Schiit Audio has a plethora of audio products ranging from personal audio to speaker-based systems. Schiit designs affordable audio products that bring happiness in your lives.

True Multibit DACs and Unique Digital Filter

Unlike ordinary DACs that use delta-sigma, NOS (new old stock) D/A chips, multibit chips, high-cost R2R ladders, Schiit uses unique DSP-based closed-form digital filter which improves the sonic performance of the multibit DAC. Therefore the Schiit's multibit technology brings all of it together using the current-production, medical/military grade D/A converters.

Innovation in Analog

Schiit has opted for an innovative approach for the analog side as well. Even the most affordable Schiit headphone amplifier is a miniature, fully discrete, DC coupled, current-feedback power amplifier. Schiit is credited for introducing Continuity output stage to solve the issue of transconductance droop which was common in Class AB amplifier design. Schiit has also developed balanced topologies like Nexus in Ragnarok 2 and a perfect combination of tube and solid-state with Coherence in Lyr 3.

Designed with High-End Materials for Durability

All the Schiit products are designed for solidity and durability. Even the smallest of the products are made of aluminium and steel while the larger products are made of high-end C core transformers, power supply filtering and low-noise control. All the products have to go through severe testing procedures including the latest APx555 audio analyzer and Avermetrics analyzers. Every product from Asgard and up goes through burn-in to address the issues faced during the initial period of usage. Schiit takes care of all the service and support requirements so that you can concentrate on great sound.

Handcrafted in the USA

Schiit believes that local control of all the aspects of production improves the delivering of the product. Therefore all the Schiit products are designed and made in the USA and most of the cost of the components are going to the US-based companies. Assembled in the USA means that Schiit's chassis guys are from San Fernando Valley, Schiit transformers are made in California, Schiit boards come from the east coast of the USA and all the designing, assembling and testing of Schiit products happen in Valencia, California.