SCHIIT PRESENTS THE NEXT-GENERATION DAC & HEADPHONE AMPLIFIER - THE FULLA E

Schiit started its journey in 2010 when two audio industry veterans decided it was time to shake things up. The two audiophiles are Jason Stoddard, formerly of Sumo, and Mike Moffat, formerly of Theta. Together, they have designed dozens of audio and A/V products. Schiit has long remained a favourite manufacturer of digital converters and headphone amplifiers among audiophiles. Schiit is now introducing the Fulla E, an evolution of the widely popular Fulla 3. The Fulla E is the all-new DAC & Amp, which doubles up as a preamplifier, designed to drive your headphones and speakers to their full potential. Schiit Fulla E is essentially an upgrade of Schiit Fulla 3, with lower distortion and output impedance, higher output capability, and improved performance. The Schiit Fulla 3; was widely accepted by audiophiles, and Schiit decided to upgrade the DAC chips to make the Fulla E even more engaging. The Fulla 3 had an AKM chipset in its circuitry in contrast to the ESS Sabre DAC chips on the all-new Fulla E. The Schiit Fulla E is a remarkable product with upgraded components in its circuitry that will be a perfect match for your headphone arsenal. Schiit Fulla E takes the headphone’s sound to all-new levels! You will hear that the sound has improved by becoming; richer, warmer, and more precise after giving it a listen.

FEATURES ESS SABRE DAC CHIPSET COUPLED WITH ALPS RK09 POTENTIOMETER THAT DELIVER PHENOMENAL AUDIO REPRODUCTION

Schiit engineers have designed the Fulla E to deliver the cleanest and most precise audio reproduction. For this reason, they have incorporated the ESS ES9018 D/A converter chipset from ESS Sabre. The SABRE32 Reference audio DAC ESS ES9018 is the world’s highest-performance 32-bit audio DAC solution targeted for consumer applications. With ESS’ patented 32-bit HyperStream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference ESS ES9018 stereo D/A converter delivers exceptional sonic performance that will satisfy the most demanding audio enthusiasts. Fulla E houses the ESS ES9018 D/A converter, with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, and precision thin-film resistors and film capacitors. It also features a CM6635 USB receiver chipset for lossless audio transmission from your devices. Fulla E delivers performance far beyond its size.

EXCEPTIONAL AMPLIFICATION ACHIEVED WITH DUAL TI OPA1656 OPAMPS

The OPA1656 is a Burr-Brown™ operational amplifier (OP amp) designed specifically for audio and industrial applications where maintaining signal fidelity is crucial. The engineers at Schiit have incorporated dual TI OPA1656 (2 amplifiers per channel) in Fulla E's circuitry. The high bandwidth, high open-loop-gain design of the OPA1656 delivers low distortion, which improves audio signal fidelity across the audio bandwidth. Fulla E packs a super punch, up to 300mW into 16 ohms, together, with a vanishingly low noise floor and low output impedance. This design makes the Fulla E a perfect match for virtually any headphone. To support headphones, Fulla E goes above and beyond. IEMs and sensitive, low-impedance headphones can both be driven with Fulla E.

ELEVATE YOUR GAMING, MUSIC, AND COMMUNICATION EXPERIENCE WITH FULLA E

Fulla E is pretty much; the answer to the question; of getting into great sound for gaming, music, or even remote office work. Fulla E is a DAC/amp with top-shelf components; that has a microphone input, too. Plug Fulla E into virtually any USB port, connect your headphones and microphone, and you are ready to experience phenomenal sound. Fulla E works seamlessly with many popular consoles like PS4, PS5, and Switch, as well as PCs, Macs, and tablets. It is ideal for use with a headset for remote office environments— the audio quality of both the headphone and mic provide crystal-clear communications. You don’t need to be a gamer to appreciate the quality of Fulla E—use it; to listen to music or connect to virtually any smart TV with the included optical port. Connect to powered monitors or speaker amps using the preamp output; to create a complete system. Fulla E has a 24-bit microphone input with TI analogue-to-digital converter, and the automatic gain control makes the microphone incredibly easy to use and adjustment-free.

EXQUISITELY CRAFTED AND BUILT IN CALIFORNIA, FUSED WITH USB AND PREAMP OUTPUTS

Although the Fulla E has an all-metal chassis that resembles other Schiit products, it differs from older amps in that it includes preamplifier outputs, allowing it to be paired with a stereo amp to power speakers or a pair of powered desktop speakers. The top panel consists of a volume knob; Turn up til you smile, but not until your ears bleed. The front panel consists of microphone input; If; you are using; a headset microphone, connect it using the pink plug on the Y-adapter. It also includes a headphone output. If you are using headphones with a headset microphone, plug in the green plug from the Y-adapter. You may also need to use the included 1/4" to 1/8" adapter. The rear panel consists of a preamp output; Plug this into your powered monitors (or a power amp) using a 1/8" TRS to dual RCA cable. It also consists of Optical Input, USB Power Input, and USB Power and Data Input. Fulla E's build is smooth yet elegant, with high-quality metal housing. All Schiit audio products are designed and made in California. Chassis, boards, transformers, assembly, and other components of the Fulla E are made primarily in the USA. The PCBs are produced in Nevada, and it all comes together in Schiit's Corpus Christi, Texas facility.
NOTE: Do not use a TRRS jack (microphone & headphone output); it will not work.