Jabra - Elite 7 Active

DESCRIPTION

SPECS

FAQs

What is the warranty on the Jabra Elite 7 Active and how do I claim it?

Jabra Elite 7 Active offers a 2 year warranty. If you need to claim warranty, you can contact us. We are quite friendly people, just sayin. You can read more about warranty here.

Are my Jabra true wireless earbuds protected against dust and sweat?

Your earbuds have an IP57 rating which indicates they are protected against dust and the effects of temporary submersion in water. The submersion test requires 30 minutes at a depth of 1m/3ft.

Can I adjust the voice guidance volume on my Jabra device?

No. It is not possible to adjust the voice guidance volume on your Jabra device.

Can I use just one of my Jabra Elite 7 Active earbuds?

Yes, you can use the right or the left earbud individually for playback of music or calls.
To activate mono earbud mode, place the unused earbud in the charging case. When you remove both earbuds from the charging case, the left and right earbuds will automatically relink and enter stereo mode.

Can I use my Jabra true wireless earbuds when swimming or bathing?

No, your earbuds are not protected from submersion in water. Furthermore, exposure to salt, chlorine, chemicals, and solvents can damage and deteriorate your earbuds.

Can I use my new Jabra Elite 7 Active true wireless Bluetooth device with other devices that have older Bluetooth versions?

A Jabra Bluetooth device is fully backward compatible with other Bluetooth devices that have Bluetooth version 2.0 or later, with Headset Profile (HSP) version 1.2 or later and Hands Free Profile (HFP) version 1.5 or later.

Can I wear my Jabra Elite 7 Active true wireless earbuds underneath a helmet?

It may be possible to wear your Jabra true wireless earbuds while wearing a helmet. However, they have not been officially tested for use with a helmet and we cannot guarantee their performance if they are used in these conditions. The design and material used in helmets may cause Bluetooth interference and reduce the performance of the earbuds.

Does a higher wattage charging pad reduce the charging time?

No. For charging pads with a minimum of 5 watts, the charging case will always draw at a rate of 5 watts, regardless of the total wattage output of the charging pad.
Total charge time will depend on the battery level of the earbuds and charging case.

How do I adjust sidetone to hear myself speaking during calls using Jabra Sound+?

To turn on/off sidetone and adjust the sidetone volume, follow these steps.
1. Open the Jabra Sound+ app.
2. In the Headset menu, tap the Settings icon on the top right. 3. Tap Headset settings, Call experience.
4. In Your voice in a call, adjust the settings according to your personal preferences.

How do I change the EarGels on my Jabra true wireless earbuds?

To change the EarGels on your Jabra true wireless earbuds, follow these guidelines.
Remove the EarGel
Use two fingers to firmly pinch the sides of the EarGel together. Gently peel the EarGel up and off the earbud.
Replace the EarGel
Align the inner circle of the EarGel with the earbud and press gently. The EarGel will snap lightly into place.

How do I manually reset my Jabra Elite 7 Active to the default settings?

When you reset your Jabra true wireless earbuds, previously paired devices and settings will be cleared.
Follow these steps to reset.
1. Place both earbuds in the charging case and leave the lid open. Ensure your earbuds are sufficiently charged.
2. Press and hold (10 seconds) the Left and Right buttons on the earbuds simultaneously until the earbud LEDs flash magenta.
3. Close the lid of the charging case (5 seconds) to complete the reset.

How do I reset the charging case for my Jabra true wireless earbuds?

If the LED on the charging case does not light up when you connect the charging case to a power source, you can try resetting the charging case.
To reset the charging case, follow these steps.
1. Open the charging case and leave the lid open.
2. Plug the charging case into a power source using the supplied USB cable. Refer to the Related FAQ section below for the recommended guidelines and specifications for chargers.
3.When the battery level LED lights up after 3 to 5 seconds, close the lid.
4. Let the earbuds and charging case fully charge.
It takes approximately 2 hours and 20 minutes to fully charge the earbuds and the charging case using the USB cable. Third party USB chargers may take longer to charge the charging case.

How do I turn on/off my Jabra Elite 7 Active?

To turn on your Jabra Elite 7 Active/Pro, remove the earbuds from the charging case. To turn off the earbuds, place them in the charging case.
Alternatively, to manually turn on the earbuds, simultaneously press the Left and Right buttons. The earbud LEDs will flash green to indicate they have been turned on. To turn off the earbuds, simultaneously press the Left and Right buttons. The earbud LEDs will flash red to indicate they have been turned off.

How do my Jabra true wireless earbuds reduce ambient noise?

The Jabra Elite 7 Active true wireless earbuds offers the following to reduce ambient noise.
1. Four-microphone technology—two microphones placed in each earbud—which point toward the user’s mouth and pick up the voice.
2. The four microphones are covered with a fine SAATI Acoustex® mesh for increased wind protection.
3. Digital signal processing removes background noise, such as traffic or office noise.
4. Passive noise isolation, by means of the shape and fit of the EarGels, blocks out and lowers the level of ambient noise you hear when you wear Jabra true wireless earbuds. Here it is important that the EarGels seal in the ears to give the best results.

How does the Prioritize Bluetooth device with call feature work?

During a call, the Jabra device will temporarily disconnect other idle Bluetooth connections, so as to maintain optimal audio quality and wireless range. When the call is ended, the Jabra device will automatically reconnect to the other Bluetooth devices again.
You can configure the Prioritize Bluetooth device with call setting in the compatible Jabra software for your device.

How many Bluetooth devices can I pair with my Jabra device?

You can pair with up to 8 devices that the Jabra device will remember. If you attempt to pair a 9th device, the Jabra device will replace the device that was first paired of the existing paired devices.
You can connect to 1 paired device at a time.
In general, pairing with additional devices is performed the same way as the initial pairing you made for your product.

What is a voice assistant?

A voice assistant is voice activated software on a smartphone or other device, that can supply information and perform certain types of tasks for the user. For example, Google Assistant™, Siri®, MS Cortana, Amazon Alexa.

What is Active Noise Cancellation (ANC)?

Active Noise Cancellation (ANC) is the reduction of unwanted low frequency background noise by use of an electronic circuit.
You can turn this feature on/off to suit your preference.

WARRANTY AND MEDIA REVIEWS

2 Year Warranty

Don't sweat it, this Jabra Elite 7 Active comes with a 2 year warranty from Jabra that covers manufacturing defects. You get 1 year manufacturer warranty straight out of the box and can avail an additional 1 year warranty by registering the product on the app. All products featured on Headphone Zone are backed by an original manufacturer's warranty.

Read more about Jabra's warranty in India.

"The fit is on point in so many ways, as are the design and customization, making the Elite 7 Active an intriguing choice for your ears. Excellent audio quality, including ANC."

Read More

"The Jabra Elite 7 Active is another high-performance sporty model from the brand. Powerful sound with multiple personalized settings, Excellent wireless performance, Long battery life."

Read More